Grinder over SMB2 Sparky

[Mable]

Eh yeah you know that Sparky npc from the smb2 tab right? I want a Grinder replacing that guy.
The Grinder should look like exactly the one from SMG made by Deoxys
This one here over the smb2 sparky.

[Marina]

Do you have the mask for this too? Bc then it's really easy.

Just rename it npc-206 and the mask npc-206m

Then make a textfile for the npc and paste this

gfxheight=64
gfxwidth=64
height=64
width=64

And you're done

[Mable]

Eh well i tried that but now it looks strange.. Can you try it?

[RudeGuy]

There is an issue with NPCs which has the same behavior as sparks: if you make them bigger with NPC codes, they can't climb the 90° angle walls. Best thing to do is put only the gfxwidht and the gfxheight.

[Marina]

Yeah I fixed that bc I made the NPC size 32x32 and the gfx size 64x64 c: