Problem with Events

supayoshi777 · Postby **supayoshi777** » Mon Jul 07, 2014 8:09 pm

Hey what's up. I'm having some trouble with an event I am trying to create. In this event, A boat is supposed to move across a lake of lava until it triggers the next event that makes the boat stop and shows a message. There is also 2 events causing the boat to float up, and then down in a continuous cycle. The event making the boat move across the lake has the layer for the boat in the section for "Layer Movement". It is supposed to move at a horizontal speed of 6 for ten seconds and then it is supposed to stop. The event is triggered by talking to a dry bones on the boat. When the event begins however, the boat only moves for 1 second and then stops for the remainder of the ten seconds of the event. Then the next event for the boat to stop occurs after the ten seconds. I've checked over all the variables numerous times but it just won't work. Should I just make a new/similar event, or is there a solution to this?

michel · Postby **michel** » Mon Jul 07, 2014 8:51 pm

The events that cause your boat to float up and down are in a loop, correct? I believe they could be resetting the boat's horizontal speed to zero. Please check.