Warp not warping to section

[Blck_Guy]

I've got this Auto-Side scrolling level (Horizontal) and when it to the point to stop, the warp will just kill you.
I see in The Invasion 2 that Redigt, moved the whole section 1 to the section the warp warps to.
Is this my case? Do I have to do it this way or can someone tell me/fix my problem?

http://bit.ly/LTINHW - Download Level. (Dropbox)

Cheers!!!

[bossedit8]

This happens because you put the exit warp a bit off the screen and/or he is touching the level's boundary. If you do that the game still thinks you are in the same Section and not on a different Section. Make sure that the Warp is "inside" the Room/Section and not at the screen's Boundary where gray is.

[Blck_Guy]

This happens because you put the exit warp a bit off the screen and/or he is touching the level's boundary. If you do that the game still thinks you are in the same Section and not on a different Section. Make sure that the Warp is "inside" the Room/Section and not at the screen's Boundary where gray is.

Did you look at the Level, bossedit8?

[bossedit8]

Did you look at the Level, bossedit8?

Yes, I did. The level was hard but I managed it on the first try.

[Blck_Guy]

Did you look at the Level, bossedit8?

Yes, I did. The level was hard but I managed it on the first try.

O.o o.O WTF!!! (Don't tell me that PLEASE!!!!!)

Ok that's was not my point, the point was the Warps are in the sections, not in the Gray parts.

[bossedit8]

Did you fix the warp that I have mentioned above? This is sadly the only solution you can do because having it on and off the boundary it destroys you because the game still thinks you are in the same section...

[Blck_Guy]

Did you fix the warp that I have mentioned above? This is sadly the only solution you can do because having it on and off the boundary it destroys you because the game still thinks you are in the same section...

How am I going to do that?

[bossedit8]

You have to grab the Exit and put it somewhere where your exit Pipe will be located and then add pipes and airship pieces up there.

[Blck_Guy]

You have to grab the Exit and put it somewhere where your exit Pipe will be located and then add pipes and airship pieces up there.

Wait, do you mean in the same section. Put the Warp in the same section?

[bossedit8]

Wait, do you mean in the same section. Put the Warp in the same section?

On a different section.

[Blck_Guy]

Wait, do you mean in the same section. Put the Warp in the same section?

On a different section.

It is, the exit part of the warp is in section 2

EDIT:

Wait, do you mean in the same section. Put the Warp in the same section?

On a different section.

Fixed!!! - Can't have it even just a little bit out of the section. Have to have it fill in the section.