SMBX2 PAL Release - Feedback, Questions and Bugs here!

Topics about events/announcements that are no longer relevant.
Wiimeiser
Snifit
Snifit
Posts: 214
Joined: Mon Jun 24, 2019 4:36 am
Flair: What?

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Wiimeiser » Mon Jan 20, 2020 10:09 pm

I think you can do it already, but it's not for the faint of heart...

Reign
Ripper II
Ripper II
Posts: 327
Joined: Tue Jan 21, 2014 4:22 am

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Reign » Thu Jan 23, 2020 3:23 am

Are we still on track for January 2020?

Not meant as a "Hurry up" message.

Cedur
Raccoon Mario
Raccoon Mario
Posts: 7073
Joined: Tue Jun 28, 2016 10:14 am
Flair: I'm gone, for chess and minesweeper
Pronouns: he/him

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Cedur » Thu Jan 23, 2020 5:16 am

Reign wrote:
Thu Jan 23, 2020 3:23 am
Are we still on track for January 2020?

Not meant as a "Hurry up" message.

January still lasts for nine days so why not (if the build is polished as much as possible until the 31st, good)

Reign
Ripper II
Ripper II
Posts: 327
Joined: Tue Jan 21, 2014 4:22 am

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Reign » Thu Jan 23, 2020 7:34 am

Cedur wrote:
Thu Jan 23, 2020 5:16 am
January still lasts for nine days so why not (if the build is polished as much as possible until the 31st, good)
Nah. It's just that if it gets delayed by two months, I'd rather know now than on the 31st.

Cedur
Raccoon Mario
Raccoon Mario
Posts: 7073
Joined: Tue Jun 28, 2016 10:14 am
Flair: I'm gone, for chess and minesweeper
Pronouns: he/him

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Cedur » Thu Jan 23, 2020 7:35 am

It doesn't look like it. They said again that it's doing fine.

cato
Volcano Lotus
Volcano Lotus
Posts: 547
Joined: Thu Aug 24, 2017 3:06 am
Flair: Koishi enjoyer
Contact:

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby cato » Thu Jan 23, 2020 9:59 am

Is there an option to shuffle blocks to transform the central block into different decoration blocks automatically?
I don't really like removing blocks then place decoration blocks randomly then fill the central block again.

Murphmario
Chargin' Chuck
Chargin' Chuck
Posts: 2382
Joined: Fri Dec 20, 2013 7:07 pm
Pronouns: he/him

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Murphmario » Thu Jan 23, 2020 3:47 pm

cato wrote:
Thu Jan 23, 2020 9:59 am
Is there an option to shuffle blocks to transform the central block into different decoration blocks automatically?
I don't really like removing blocks then place decoration blocks randomly then fill the central block again.
I think Enjl made a LunaLua code that does pretty much what you're asking for.

I just want to know if there will be more world map stuff in Beta 4.

Emral
Cute Yoshi Egg
Cute Yoshi Egg
Posts: 9722
Joined: Mon Jan 20, 2014 12:58 pm
Flair: Phoenix

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Emral » Thu Jan 23, 2020 4:02 pm

cato wrote:
Thu Jan 23, 2020 9:59 am
Is there an option to shuffle blocks to transform the central block into different decoration blocks automatically?
I don't really like removing blocks then place decoration blocks randomly then fill the central block again.
You can change a block's ID with lua. Just loop over all blocks of an ID in onStart and change it randomly.

cato
Volcano Lotus
Volcano Lotus
Posts: 547
Joined: Thu Aug 24, 2017 3:06 am
Flair: Koishi enjoyer
Contact:

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby cato » Fri Jan 24, 2020 12:33 am

Enjl wrote:
Thu Jan 23, 2020 4:02 pm
cato wrote:
Thu Jan 23, 2020 9:59 am
Is there an option to shuffle blocks to transform the central block into different decoration blocks automatically?
I don't really like removing blocks then place decoration blocks randomly then fill the central block again.
You can change a block's ID with lua. Just loop over all blocks of an ID in onStart and change it randomly.
No, I mean, while making levels in the editor.

Emral
Cute Yoshi Egg
Cute Yoshi Egg
Posts: 9722
Joined: Mon Jan 20, 2014 12:58 pm
Flair: Phoenix

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Emral » Fri Jan 24, 2020 1:19 am

No because we're not the ones who make the editor.

DrMekar
Eerie
Eerie
Posts: 778
Joined: Sat Apr 08, 2017 7:16 am
Flair: CUSTOM CHARACTER CREATOR
Contact:

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby DrMekar » Fri Jan 24, 2020 11:06 am

I finally decided to make a Custom Character over Uncle Broadsworth and not just
an Character ripped from a Spritesheet, a fully Custom Character but this not
important.

Anyway after Hours of working on it, I wanted to test it, only to find out that Broadsworth
Height can't seemenigly be changed. I sticked to "Master Framer" how I named it, always
keept the Sprites inside the Box and so on. I changed the Size Number to the Height I use
multiple times without anything happening. I reloaded the level, the Editor and anything
without sucess. Even tried out and Character Calibrator without sucess.

Emral
Cute Yoshi Egg
Cute Yoshi Egg
Posts: 9722
Joined: Mon Jan 20, 2014 12:58 pm
Flair: Phoenix

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Emral » Fri Jan 24, 2020 12:24 pm

When making custom characters, it's advised to replace one of the standard 5. The others have their own basegame lua code that runs for them, which can and will cause conflicts. I'm not surprised this caused issues for you.
Broadsword replaces Mario internally, for reference.

DrMekar
Eerie
Eerie
Posts: 778
Joined: Sat Apr 08, 2017 7:16 am
Flair: CUSTOM CHARACTER CREATOR
Contact:

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby DrMekar » Fri Jan 24, 2020 12:57 pm

Enjl wrote:
Fri Jan 24, 2020 12:24 pm
When making custom characters, it's advised to replace one of the standard 5. The others have their own basegame lua code that runs for them, which can and will cause conflicts. I'm not surprised this caused issues for you.
Broadsword replaces Mario internally, for reference.
That's intresting. I previouly already did Xia (Samus) and Gordan Leitwolt (Megaman) before and didn't issuses like that. (Only a small one: when doing Gordan, the Megaman Slide Animation didn't fitted with the Walking Animation, but aside from that, Nothing. :?:
Anyway. Is there anything I can do except for replacing someone else?

Mr General Guy
Bit
Bit
Posts: 75
Joined: Sat Nov 12, 2016 6:47 am

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Mr General Guy » Fri Jan 24, 2020 1:38 pm

Yo, can you cancel Wario's Ground Pound mid-animation? I was playing a level, and I ground pounded on a spring, and Wario kept on doing his ground pound animation infinitely. He fell on the spring, bounced back up, pounded back on the spring, and since he cannot move sideways during the animation, I was forced to do a reset. If it's already possible to cancel this animation, how? If it's not already possible, I really hope this can be fixed in the future. My personal suggestion is to allow the animation to be canceled by pressing the ground pound button again to keep stuff like this from happening.

Emral
Cute Yoshi Egg
Cute Yoshi Egg
Posts: 9722
Joined: Mon Jan 20, 2014 12:58 pm
Flair: Phoenix

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Emral » Fri Jan 24, 2020 3:36 pm

Mr General Guy wrote:
Fri Jan 24, 2020 1:38 pm
Yo, can you cancel Wario's Ground Pound mid-animation? I was playing a level, and I ground pounded on a spring, and Wario kept on doing his ground pound animation infinitely. He fell on the spring, bounced back up, pounded back on the spring, and since he cannot move sideways during the animation, I was forced to do a reset. If it's already possible to cancel this animation, how? If it's not already possible, I really hope this can be fixed in the future. My personal suggestion is to allow the animation to be canceled by pressing the ground pound button again to keep stuff like this from happening.
Just fixed it for Beta 4. Good find! Just in time, too.

DrMekar
Eerie
Eerie
Posts: 778
Joined: Sat Apr 08, 2017 7:16 am
Flair: CUSTOM CHARACTER CREATOR
Contact:

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby DrMekar » Fri Jan 24, 2020 5:56 pm

Enjl wrote:
Fri Jan 24, 2020 12:24 pm
When making custom characters, it's advised to replace one of the standard 5. The others have their own basegame lua code that runs for them, which can and will cause conflicts. I'm not surprised this caused issues for you.
Broadsword replaces Mario internally, for reference.
So, I looked around a bit in Broadsworth Lua Code and changed the height Numbers to the ones I need. After a bit
of trying around I got about everything as I wanted it, except for the Attack Pose in Crouch Mode which does a really Weird
Thing by appearing really offset below and beneath the orginal sprite, though I can't find any size for that action in the code.

Murphmario
Chargin' Chuck
Chargin' Chuck
Posts: 2382
Joined: Fri Dec 20, 2013 7:07 pm
Pronouns: he/him

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Murphmario » Fri Jan 24, 2020 9:51 pm

I know it's been deprecated, but will leveltimer.lua get fixed? It breaks when using old codes currently, all because of line 14.

Emral
Cute Yoshi Egg
Cute Yoshi Egg
Posts: 9722
Joined: Mon Jan 20, 2014 12:58 pm
Flair: Phoenix

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby Emral » Sat Jan 25, 2020 3:52 am

Murphmario wrote:
Fri Jan 24, 2020 9:51 pm
I know it's been deprecated, but will leveltimer.lua get fixed? It breaks when using old codes currently, all because of line 14.
You should use timer.lua
https://docs.google.com/document/d/1uOd ... 1h3s6vmjm7

SuperSmashbroFanX
Banned
Posts: 83
Joined: Sun Jan 26, 2020 6:33 am

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby SuperSmashbroFanX » Sun Jan 26, 2020 6:45 am

Are you going to add ice bros to smbx

ElectriKong
Posts: 4650
Joined: Mon Jun 06, 2016 4:32 pm
Flair: I have NO idea what to put here
Pronouns: he/him
Contact:

Re: SMBX2 PAL Release - Feedback, Questions and Bugs here!

Postby ElectriKong » Sun Jan 26, 2020 7:42 am

SuperSmashbroFanX wrote:
Sun Jan 26, 2020 6:45 am
Are you going to add ice bros to smbx
Enjl thinks that they are inherently unfun, so don't get your hopes up for them ever becoming a base game NPC.


Return to “Events and Announcements”

Who is online

Users browsing this forum: No registered users and 5 guests

SMWCentralTalkhausMario Fan Games GalaxyKafukaMarioWikiSMBXEquipoEstelari