Doors
Posted: Sat Feb 08, 2014 4:30 pm
How do you make it so when you finish the level, you come out the door you came? like in the castle adventure episode
Well I've tried it and it hadn't worked, here's the link to my pack http://www.smbxgame.com/forums/v ... f=34&t=595Natsu wrote:Like I said, that's how Hubs work. Once you enter a level on a Hub you go back to the Hub exiting the door you entered to access your level. Like I said, I THINK that happens automatically, otherwise use stars to save the progress and trigger a door to appear in front of you that will lead you back to the Hub, it's that simple.
srry no good experimented with thatelitalianoverde wrote:If I remember right there's a "warp to level" function in the Warps and Doors tab. Type the name of the level that you wish to be warped to and you will go to that level instead of the hub. I believe normal entrance and warp 1,2, etc. was the ability to choose from where in the level you warp to so there's that. You may want to experiment with it a bit, as I haven't used that function too often. I hope this helps.
tried it, didn't work, does it have anything to do with SMB3 star exits?Bj007pro wrote:Right, If you Want to have your Level Finish and exit back to the Hub.lvl in a different location, this is how you do it.
1) Make the warp (Door or Pipe doesn't matter) and in the section of the Warps and Doors Window type in you name of your hub.lvl in the inner lined Square called Warp to Level
and make sure you put the .lvl after the name of the hub.lvl .
2) Put the Warp number of the Exit in you Hub.lvl, this will make your Level exit in to the place where E.G 1 is in Section 1 and you want exit in Section 3 You would want something like a Door or a Pipe to exit out of..
3) Leave Level Entrance (Can not enter) alone, leave it untick. Now place your Warp on your level. Remember that Pipe Warps to other Levels have to have the Entrance and Exit Directions right.
Now save it. Just to make sure because it is time to test it. If you have your Warp on your Hub Level to Warp to This level we are working with. When you've made your Hub Level to be able to Warp to the Level play through your level until you get to the door exit. Then Test it out to see if it works. Just go through as normal.
mario610 wrote:tried it, didn't work, does it have anything to do with SMB3 star exits?Bj007pro wrote:Right, If you Want to have your Level Finish and exit back to the Hub.lvl in a different location, this is how you do it.
1) Make the warp (Door or Pipe doesn't matter) and in the section of the Warps and Doors Window type in you name of your hub.lvl in the inner lined Square called Warp to Level
and make sure you put the .lvl after the name of the hub.lvl .
2) Put the Warp number of the Exit in you Hub.lvl, this will make your Level exit in to the place where E.G 1 is in Section 1 and you want exit in Section 3 You would want something like a Door or a Pipe to exit out of..
3) Leave Level Entrance (Can not enter) alone, leave it untick. Now place your Warp on your level. Remember that Pipe Warps to other Levels have to have the Entrance and Exit Directions right.
Now save it. Just to make sure because it is time to test it. If you have your Warp on your Hub Level to Warp to This level we are working with. When you've made your Hub Level to be able to Warp to the Level play through your level until you get to the door exit. Then Test it out to see if it works. Just go through as normal.
No I meant the star form Super Mario Bros. 3 not 3 stars to exitBj007pro wrote:mario610 wrote:tried it, didn't work, does it have anything to do with SMB3 star exits?Bj007pro wrote:Right, If you Want to have your Level Finish and exit back to the Hub.lvl in a different location, this is how you do it.
1) Make the warp (Door or Pipe doesn't matter) and in the section of the Warps and Doors Window type in you name of your hub.lvl in the inner lined Square called Warp to Level
and make sure you put the .lvl after the name of the hub.lvl .
2) Put the Warp number of the Exit in you Hub.lvl, this will make your Level exit in to the place where E.G 1 is in Section 1 and you want exit in Section 3 You would want something like a Door or a Pipe to exit out of..
3) Leave Level Entrance (Can not enter) alone, leave it untick. Now place your Warp on your level. Remember that Pipe Warps to other Levels have to have the Entrance and Exit Directions right.
Now save it. Just to make sure because it is time to test it. If you have your Warp on your Hub Level to Warp to This level we are working with. When you've made your Hub Level to be able to Warp to the Level play through your level until you get to the door exit. Then Test it out to see if it works. Just go through as normal.
Did you add you exit door to have 3 Star before you can enter?
Where does it take you when you enter?mario610 wrote:No I meant the star form Super Mario Bros. 3 not 3 stars to exit
It just puts me at level start whenever I collected the star to end the levelBj007pro wrote:Where does it take you when you enter?mario610 wrote:No I meant the star form Super Mario Bros. 3 not 3 stars to exit
When you made the Warp to exit in the different place in your hub.lvl do you have the correct Warp Number to the Section?
Let's not bump month old topics, please.ehamawy wrote:What we're trying to figure out is when you collect an "end of the level star", how to choose where it sends you. (Instead of the world map or level 1)