Page 16 of 208

Re: SMBX 2.0 Beta 3

Posted: Tue Nov 15, 2016 12:29 pm
by ElectriKong
Devan2002 wrote:
King of Eterity wrote:
Devan2002 wrote:
When I try to open it, absolutely nothing happens. It doesn't open anything, it doesn't show an error message. Just absolutely nothing.
Have you tried increasing the resolution?
I have the resolution at the highest setting by default. I only unzipped the folder called "data". (Well, it's all complicated)
Unzip the whole thing and extract it all into a folder for the application.

Re: SMBX 2.0 Beta 3

Posted: Tue Nov 15, 2016 12:30 pm
by Hoeloe
Devan2002 wrote:

I have the resolution at the highest setting by default. I only unzipped the folder called "data". (Well, it's all complicated)
That's likely your problem. Extract the whole thing, then run SMBX2.exe in your extracted folder.

Re: SMBX 2.0 Beta 3

Posted: Fri Nov 18, 2016 3:02 pm
by Devan2002
King of Eterity wrote:
Devan2002 wrote:
King of Eterity wrote: Have you tried increasing the resolution?
I have the resolution at the highest setting by default. I only unzipped the folder called "data". (Well, it's all complicated)
Unzip the whole thing and extract it all into a folder for the application.
To make matters worse, I can't remember what I unzipped! The only thing I know I did unzip was the data folder.

Re: SMBX 2.0 Beta 3

Posted: Fri Nov 18, 2016 3:24 pm
by ElectriKong
Devan2002 wrote:
King of Eterity wrote:
Devan2002 wrote:
I have the resolution at the highest setting by default. I only unzipped the folder called "data". (Well, it's all complicated)
Unzip the whole thing and extract it all into a folder for the application.
To make matters worse, I can't remember what I unzipped! The only thing I know I did unzip was the data folder.
You probably should check the downloads or wherever you extracted the file to see what was unzipped. TBH you should of unzipped the whole thing in the first place, and therefore don't know why you did not.

Re: SMBX 2.0 Beta 3

Posted: Fri Nov 18, 2016 3:34 pm
by LoZFTW
you'd better tell me theres more multiplayer stuff

Re: SMBX 2.0 Beta 3

Posted: Sat Nov 19, 2016 10:25 am
by JPingas456
This version looks very awesome. The only thing i don't like is the new editor. I'm more used to the old editor, but other than that, the UI looks pretty cool, new characters are awesome and i'm very hyped for this. #SMBX2.0HYPETRAIN

Re: SMBX 2.0 Beta 3

Posted: Sat Nov 19, 2016 2:10 pm
by luigirulz
When i load it i get this error
Spoiler: show
Image
and in Mario's Challenge, it soft-locks when i try to enter the pipe as Mega-man with power-ups.

Re: SMBX 2.0 Beta 3

Posted: Sat Nov 19, 2016 2:14 pm
by loop
luigirulz wrote:When i load it i get this error (attached) and in Mario's Challenge, it soft-locks when i try to enter the pipe as Mega-man with power-ups.
Error? It isn't attached. Try posting an image.

Re: SMBX 2.0 Beta 3

Posted: Sat Nov 19, 2016 2:17 pm
by luigirulz
Jayce 777 wrote:
luigirulz wrote:When i load it i get this error (attached) and in Mario's Challenge, it soft-locks when i try to enter the pipe as Mega-man with power-ups.
Error? It isn't attached. Try posting an image.
I know. Iv'e fixed it now ;D

Re: SMBX 2.0 Beta 3

Posted: Sat Nov 19, 2016 2:26 pm
by Hoeloe
luigirulz wrote:When i load it i get this error
Spoiler: show
Image
and in Mario's Challenge, it soft-locks when i try to enter the pipe as Mega-man with power-ups.

This usually means you haven't installed the correct drivers for your graphics card. Many graphics cards will use a generic Microsoft driver until you install the proper one. This will allow them to work, but many features such as OpenGL won't operate properly. You should download and install the drivers for your graphics card, or update them if they are already installed.

Re: SMBX 2.0 Beta 3

Posted: Mon Nov 21, 2016 7:24 pm
by Lucaman
It's amazing that Smbx and LuaLuna are getting combined to turn into 2.0! But there's a problem. With this version. My computer lags really hard.

Re: SMBX 2.0 Beta 3

Posted: Tue Nov 22, 2016 12:49 pm
by ElectriKong
Lucaman wrote:It's amazing that Smbx and LuaLuna are getting combined to turn into 2.0! But there's a problem. With this version. My computer lags really hard.
How old is your computer? What are the specs?

Re: SMBX 2.0 Beta 3

Posted: Wed Nov 23, 2016 12:04 pm
by luigirulz
Hoeloe wrote:
luigirulz wrote:When i load it i get this error
Spoiler: show
Image
and in Mario's Challenge, it soft-locks when i try to enter the pipe as Mega-man with power-ups.

This usually means you haven't installed the correct drivers for your graphics card. Many graphics cards will use a generic Microsoft driver until you install the proper one. This will allow them to work, but many features such as OpenGL won't operate properly. You should download and install the drivers for your graphics card, or update them if they are already installed.
Can't update drivers because of unknown errors but i've tried this on a better computer with working OpenGL and on both versions i've only got the softlock when Mega-man is fully powered up.

Re: SMBX 2.0 Beta 3

Posted: Wed Nov 23, 2016 12:27 pm
by Hoeloe
The soft lock may be a bug, we'll have to try and reproduce it. The error is an OpenGL issue though.

Re: SMBX 2.0 Beta 3

Posted: Thu Nov 24, 2016 10:57 am
by Angelus
How to make the portal warp work? Everytime I test it, nothing happens. I just get stuck on the ground and walk slowly instead of being teleported.

Re: SMBX 2.0 Beta 3

Posted: Thu Nov 24, 2016 2:18 pm
by ElectriKong
Angelus wrote:How to make the portal warp work? Everytime I test it, nothing happens. I just get stuck on the ground and walk slowly instead of being teleported.
Don't know. You should probably use the insta warp instead

Re: SMBX 2.0 Beta 3

Posted: Thu Nov 24, 2016 2:54 pm
by Lucaman
King of Eterity wrote:
Lucaman wrote:It's amazing that Smbx and LuaLuna are getting combined to turn into 2.0! But there's a problem. With this version. My computer lags really hard.
How old is your computer? What are the specs?
I got from my dad. I'm pretty sure it's from 2007.

It's a Toshiba laptop, the System Model is Satellite L505 and my processor is Pentium(R) Dual-Core CPU and T440 2.20Ghz (2 CPU's) 2.2 GHz.

Re: SMBX 2.0 Beta 3

Posted: Thu Nov 24, 2016 3:50 pm
by Yoshi021
Angelus wrote:How to make the portal warp work? Everytime I test it, nothing happens. I just get stuck on the ground and walk slowly instead of being teleported.
The portal warp is for SMBX 38A and PGE-only levels(.lvlx). Won't work in 2.0

Re: SMBX 2.0 Beta 3

Posted: Thu Nov 24, 2016 5:42 pm
by Tiger Festival
Lucaman wrote:
King of Eterity wrote:
Lucaman wrote:It's amazing that Smbx and LuaLuna are getting combined to turn into 2.0! But there's a problem. With this version. My computer lags really hard.
How old is your computer? What are the specs?
I got from my dad. I'm pretty sure it's from 2007.

It's a Toshiba laptop, the System Model is Satellite L505 and my processor is Pentium(R) Dual-Core CPU and T440 2.20Ghz (2 CPU's) 2.2 GHz.
My processor has only 2.0ghz for both cores and SMBX runs phenomenally well. What's the Ram? Did you optimize your computer?(As in disk cleaning, disk defragmentation, disabling unnecessary background programs etc.) Doing these things should help speed up the game as well as your computer as a whole.

Re: SMBX 2.0 Beta 3

Posted: Fri Nov 25, 2016 7:43 am
by Angelus
I see, thanks!