Super Mario Bros. X Forums

I don't know not to take screenshots in PGE. How do I fix this?

Did you try checking pge or maybe search fpr it by yourself? It's really easy to find just like it works in smbx.

Same way you do it in SMBX... yet again. Do you see the pattern?

Izturo Mashiro wrote:How do I fix this?

You fix this problem by informing yourself about the editor. In addition to what Enjl said, you can also go to File > Export Section to Image to screenshot the whole section.

I already solved. Thank you for your help!

Izturo Mashiro wrote:I already solved. Thank you for your help!

Sure just like the other two times

I can not add custom music in PGE? How do I fix this?

You were in the Section Settings menu just half an hour ago.

Can you actually try testing out anything before you ask such simple questions?

I have with problems running on the PGE with the LunaDLL. How do I fix this?

Izturo Mashiro wrote:

I have with problems running on the PGE with the LunaDLL. How do I fix this?

You need to describe your problems. Now you're just stating them. Also, judging from the frequency you're posting these questions in, you're probably not trying hard enough to figure this stuff out by yourself.

Also, since a lot of your questions revolve around PGE, I'd rather if you posted them in its topic. I've merged your topics with the PGE thread.

I got it, Valtteri. I no longer post in Help and Support.

Izturo Mashiro wrote:

I have with problems running on the PGE with the LunaDLL. How do I fix this?

Follow this instruction:
1) run PGE Editor
2) run LnuaLUA-SMBX in editor mode and minimaze it as-is
3) open/create your level in PGE Editor and save it, then try to "Test" -> "Test via SMBX".
Should work: your level in PGE Editor will be instantly opened in the SMBX with running of a test.

Command "Test via SMBX" works when LunaLUA-SMBX is running in editor mode.

Izturo Mashiro wrote:I don't know not to take screenshots in PGE. How do I fix this?

1) Use F12 key or "File" -> "Export to image..." (export selected region) or "Export section to image" (export entire section)
2) Drag big and yellow points on the yellow net to choice a range which will be exported. Then press Enter key (or find green check sign on a toolbar)
3) Choice preferences which you wish to apply for your screen
4) choice place where you wish put it
5) profit!

Izturo Mashiro wrote:I do not know the autoscroll in PGE. How do I fix this?

Read this: http://help.engine.wohlnet.ru/leveledit ... croll.html


P.S. thanks for a questions which I wil add them into PGE FAQ
http://engine.wohlnet.ru/pgewiki/Freque ... _Questions

Wohlstand, can you give me download links for the stuff I need for SMBX 1.4.1 on WinXP?
Because I can't find the chinese letters via google, neither the rest you linked.
And also, are you going to make it easier to download? (remove the necessity of changing the location and downloading the asian letter compatiblity)

ShadowStarX wrote:Wohlstand, can you give me download links for the stuff I need for SMBX 1.4.1 on WinXP?
Because I can't find the chinese letters via google, neither the rest you linked.

To install Chinese Hieroglyphic fonts, goto:
[Control Panel] -> [International Standards] -> [open second tab] -> [choice lowerest checkbox "Enable support of Hieroglyphic fonts"] and press Ok.
You would need an install disk, because it will install some bunch (~250 MB) of libraries to provide support of Asian lettering.

This is a detail read-me where I wrote hoto take a running of that on different Windows versions + VirtualBox notes:
http://engine.wohlnet.ru/docs/Collected ... lstand.txt
Download SMBX 1.4.1 itself:
Mirror 1 (my server)
Mirror 2 (Yandex disk) (Would be faster and stabler for non-European people)

ShadowStarX wrote: And also, are you going to make it easier to download? (remove the necessity of changing the location and downloading the asian letter compatibility)

I'm trying to retrieve source code to fix this shit and allow locale-independent usage of SMBX 1.4.1. Without source code is impossible to resolve this shit.

Wohlstand wrote:

ShadowStarX wrote:Wohlstand, can you give me download links for the stuff I need for SMBX 1.4.1 on WinXP?
Because I can't find the chinese letters via google, neither the rest you linked.

To install Chinese Hieroglyphic fonts, goto:
[Control Panel] -> [International Standards] -> [open second tab] -> [choice lowerest checkbox "Enable support of Hieroglyphic fonts"] and press Ok.
You would need an install disk, because it will install some bunch (~250 MB) of libraries to provide support of Asian lettering.

This is a detail read-me where I wrote hoto take a running of that on different Windows versions + VirtualBox notes:
http://engine.wohlnet.ru/docs/Collected ... lstand.txt
Download SMBX 1.4.1 itself:
Mirror 1 (my server)
Mirror 2 (Yandex disk) (Would be faster and stabler for non-European people)

ShadowStarX wrote: And also, are you going to make it easier to download? (remove the necessity of changing the location and downloading the asian letter compatibility)

I'm trying to retrieve source code to fix this shit and allow locale-independent usage of SMBX 1.4.1. Without source code is impossible to resolve this shit.

Thanks for help, installing Chinese letters seems to be done succesfully, but there is a 2nd problem.
What does that x86 copy_files.bat mean? Where do I find it/download it? (google is messy)

ShadowStarX wrote:

Wohlstand wrote:

ShadowStarX wrote:Wohlstand, can you give me download links for the stuff I need for SMBX 1.4.1 on WinXP?
Because I can't find the chinese letters via google, neither the rest you linked.

To install Chinese Hieroglyphic fonts, goto:
[Control Panel] -> [International Standards] -> [open second tab] -> [choice lowerest checkbox "Enable support of Hieroglyphic fonts"] and press Ok.
You would need an install disk, because it will install some bunch (~250 MB) of libraries to provide support of Asian lettering.

This is a detail read-me where I wrote hoto take a running of that on different Windows versions + VirtualBox notes:
http://engine.wohlnet.ru/docs/Collected ... lstand.txt
Download SMBX 1.4.1 itself:
Mirror 1 (my server)
Mirror 2 (Yandex disk) (Would be faster and stabler for non-European people)

ShadowStarX wrote: And also, are you going to make it easier to download? (remove the necessity of changing the location and downloading the asian letter compatibility)

I'm trying to retrieve source code to fix this shit and allow locale-independent usage of SMBX 1.4.1. Without source code is impossible to resolve this shit.

Thanks for help, installing Chinese letters seems to be done succesfully, but there is a 2nd problem.
What does that x86 copy_files.bat mean? Where do I find it/download it? (google is messy)

That BAT file already included with SMBX 1.4.1 archive. If you doesn't see that file, you took a wrong archive. You need to take "smbx-v1.4.1_repacked_by_Wohlstand.7z" archive, because I resolves some crap which was inside

Wohlstand wrote:That BAT file already included with SMBX 1.4.1 archive. If you doesn't see that file, you took a wrong archive. You need to take "smbx-v1.4.1_repacked_by_Wohlstand.7z" archive, because I resolves some crap which was inside

Thanks for the help again, but now I get an error a bit later on, it's 'Runtime Error 13 - Type mismatch' (even if I have my location as 'China')

ShadowStarX wrote:

Wohlstand wrote:That BAT file already included with SMBX 1.4.1 archive. If you doesn't see that file, you took a wrong archive. You need to take "smbx-v1.4.1_repacked_by_Wohlstand.7z" archive, because I resolves some crap which was inside

Thanks for the help again, but now I get an error a bit later on, it's 'Runtime Error 13 - Type mismatch' (even if I have my location as 'China')

try to delete "config.dat" file, because it would be invalid and it will be re-generated again.
EDIT: No, you should change not "location", change "standards and formats":
Where "English (Canada)", must be replaced with "Chinese (Simplified, China)":

Important Note for all people who uses Chinese characters if you have trouble to run PGE apps!

Snoopy Tour was tried to use PGE, but he got "Can't find plugin for Windows platform". This trouble caused because he placed PGE installation into path with Chinese characters. I don't know why, but with Europan/Cyrillic/ASCII PGE Works fine and has no troubles with non-ASCII characters, but trouble was occupied with Chinese characters.

Be careful!
Or I would to build both static and dynamic versions of PGE (static version of PGE shouldn't have troubles with paths to DLL's in dynamic version)

Note: Difference between static and dynamic versions of app:
- Static version of app doesn't requires lots of DLL's, but has larger size
- Dynamic version of app has smaller size, but requires lots of DLL's


P.S. Who interested to read comparison between SMBX by 38A and PGE, I made a Wiki page about Chinese SMBX built:
http://engine.wohlnet.ru/pgewiki/Super_ ... ._X_by_38A