SMBX2 PAL Release - Feedback, Questions and Bugs here!

Topics about events/announcements that are no longer relevant.

Moderator: Userbase Moderators

ElmerMouseFan34
Buster Beetle
Buster Beetle
Posts: 81
Joined: Thu Mar 01, 2018 12:16 pm

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby ElmerMouseFan34 » Wed May 29, 2019 3:51 pm

Enjl wrote:
Wed May 29, 2019 2:10 pm
Can't help you unless you share the error messages. Error messages reveal what caused the error.
Here it is, the message error:
Image

Emral
Cute Yoshi Egg
Cute Yoshi Egg
Posts: 9890
Joined: Mon Jan 20, 2014 12:58 pm
Flair: Phoenix

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Emral » Wed May 29, 2019 3:51 pm

ElmerMouseFan34 wrote:
Wed May 29, 2019 3:51 pm
Enjl wrote:
Wed May 29, 2019 2:10 pm
Can't help you unless you share the error messages. Error messages reveal what caused the error.
Here it is, the message error:
Image
What else are you doing in the level? Any lua code related to orbits? Paddlewheels?

ElmerMouseFan34
Buster Beetle
Buster Beetle
Posts: 81
Joined: Thu Mar 01, 2018 12:16 pm

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby ElmerMouseFan34 » Wed May 29, 2019 3:54 pm

Enjl wrote:
Wed May 29, 2019 3:51 pm
What else are you doing in the level? Any lua code related to orbits? Paddlewheels?
Maybe it was the inclusion of Paddlewheels in the level... ^^;

Emral
Cute Yoshi Egg
Cute Yoshi Egg
Posts: 9890
Joined: Mon Jan 20, 2014 12:58 pm
Flair: Phoenix

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Emral » Wed May 29, 2019 4:00 pm

ElmerMouseFan34 wrote:
Wed May 29, 2019 3:54 pm
Enjl wrote:
Wed May 29, 2019 3:51 pm
What else are you doing in the level? Any lua code related to orbits? Paddlewheels?
Maybe it was the inclusion of Paddlewheels in the level... ^^;
The existence of paddlewheels by itself doesn't cause a crash. There has to be some specific scenario that causes the error. But since the error moreso lies with orbits, it shouldn't be too hard to look into and replicate. Thanks for the report!

toxicynol
Goomba
Goomba
Posts: 1
Joined: Wed May 29, 2019 4:09 pm

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby toxicynol » Wed May 29, 2019 4:29 pm

help i cant play the game when i press play in the launcher it does not appear all i can do is to enter the level editor

DrMekar
Eerie
Eerie
Posts: 786
Joined: Sat Apr 08, 2017 7:16 am
Flair: CUSTOM CHARACTER CREATOR
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby DrMekar » Wed May 29, 2019 6:30 pm

toxicynol wrote:
Wed May 29, 2019 4:29 pm
help i cant play the game when i press play in the launcher it does not appear all i can do is to enter the level editor
That's a Bug caused by a dot in the title of an Episode in your worlds Folder. Make sure that No Episode in the Main Folder has a Dot in the name.

ElmerMouseFan34
Buster Beetle
Buster Beetle
Posts: 81
Joined: Thu Mar 01, 2018 12:16 pm

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby ElmerMouseFan34 » Thu May 30, 2019 6:19 am

Enjl wrote:
Wed May 29, 2019 4:00 pm
The existence of paddlewheels by itself doesn't cause a crash. There has to be some specific scenario that causes the error. But since the error moreso lies with orbits, it shouldn't be too hard to look into and replicate. Thanks for the report!
Okay, I replicated what I did with the Paddlewheels in a test level I made. It looks like it can't be set to "Doesn't move".

Edit #1: Even when not set to "Doesn't move", the same message appears. Maybe is due to the fact the Paddlewheels are in the same section as the goal?!

Edit #2: The paddlewheels don't work properly after finishing a level, even when set it isn't set to "Doesn't move" or when in a different section.

Cedur
Link
Link
Posts: 7073
Joined: Tue Jun 28, 2016 10:14 am
Flair: I'm gone, for chess and minesweeper
Pronouns: he/him

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Cedur » Thu May 30, 2019 8:02 am

Snowy_Desert wrote: I didn't know where to ask but there will be an episode for ASLC and SLVC after all?

Quick answer: No. At least not by the respective hosts.

Funny Paradox
Goomba
Goomba
Posts: 2
Joined: Sun Jun 25, 2017 10:12 am
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Funny Paradox » Fri May 31, 2019 12:34 am

When i try to go in a level by the world map to show the invisible pattern it show me this Image

IAmPlayer
Volcano Lotus
Volcano Lotus
Posts: 560
Joined: Sun May 21, 2017 3:36 am
Flair: I'm a hellspawn.
Pronouns: he/him
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby IAmPlayer » Fri May 31, 2019 5:57 am

You shouldn't use the PGE Alpha Tester.

Wohlstand
Chargin' Chuck
Chargin' Chuck
Posts: 2008
Joined: Tue Feb 11, 2014 4:44 pm
Flair: [ˈvoːlˌʃtant], 狐エンジニア
Pronouns: he/him
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Wohlstand » Fri May 31, 2019 6:49 am

Funny Paradox wrote:
Fri May 31, 2019 12:34 am
When i try to go in a level by the world map to show the invisible pattern it show me this Image
It's the world map testing mode which doesn't mean you will play each level. Instead, you need to type the exit code to affect path opener to see when they will be opened. If you wish to play this episode in normal mode, go to "Test -> LunaTester -> Start legacy engine", and then, choose your episode in the menu.

PGE Engine only allows this [world map testing with no level playing] mode. For now, it has complete implementation SMBX's vanilla world map sub-system and can be used for world map tests. However, if you are using anything extra than vanilla tech (using new LunaLua-based features), you should run SMBX Engine to test that.

Funny Paradox
Goomba
Goomba
Posts: 2
Joined: Sun Jun 25, 2017 10:12 am
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Funny Paradox » Fri May 31, 2019 7:40 am

It's the world map testing mode which doesn't mean you will play each level. Instead, you need to type the exit code to affect path opener to see when they will be opened. If you wish to play this episode in normal mode, go to "Test -> LunaTester -> Start legacy engine", and then, choose your episode in the menu.

PGE Engine only allows this [world map testing with no level playing] mode. For now, it has complete implementation SMBX's vanilla world map sub-system and can be used for world map tests. However, if you are using anything extra than vanilla tech (using new LunaLua-based features), you should run SMBX Engine to test that.
I Choose The SMB2 Crystal Ball But What i Should Write ?

PdizzleParker
Chain Chomp
Chain Chomp
Posts: 324
Joined: Fri Aug 10, 2018 11:26 am
Flair: doin your mom
Pronouns: they/them
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby PdizzleParker » Fri May 31, 2019 11:19 pm

Bug: The jumping piranha plant is seen as a dummy npc in the game and it becomes this nonmoving, unkillable object.
Gif:

Image

Murphmario
2025 Egg Hunter
2025 Egg Hunter
Posts: 2389
Joined: Fri Dec 20, 2013 7:07 pm
Pronouns: he/him

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Murphmario » Fri May 31, 2019 11:56 pm

thegameseum wrote:
Fri May 31, 2019 11:19 pm
Bug: The jumping piranha plant is seen as a dummy npc in the game and it becomes this nonmoving, unkillable object.
Gif:

Image
Assuming you're not using the one in the tileset item box: use that. The other one isn't coded.

Emerald Galaxy
Koopa
Koopa
Posts: 18
Joined: Sun Apr 21, 2019 6:27 am
Flair: =w=

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Emerald Galaxy » Sat Jun 01, 2019 2:33 am

Do the animation settings in the block ini work?

Hoeloe
Phanto
Phanto
Posts: 1465
Joined: Sat Oct 03, 2015 6:18 pm
Flair: The Codehaus Girl
Pronouns: she/her

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Hoeloe » Sat Jun 01, 2019 7:06 am

Block ini files only affect the editor, they don't change anything in the game itself.

PdizzleParker
Chain Chomp
Chain Chomp
Posts: 324
Joined: Fri Aug 10, 2018 11:26 am
Flair: doin your mom
Pronouns: they/them
Contact:

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby PdizzleParker » Sat Jun 01, 2019 8:15 am

Murphmario wrote:
Fri May 31, 2019 11:56 pm
thegameseum wrote:
Fri May 31, 2019 11:19 pm
Bug: The jumping piranha plant is seen as a dummy npc in the game and it becomes this nonmoving, unkillable object.
Gif:

Image
Assuming you're not using the one in the tileset item box: use that. The other one isn't coded.
That worked for me, thanks.

Emerald Galaxy
Koopa
Koopa
Posts: 18
Joined: Sun Apr 21, 2019 6:27 am
Flair: =w=

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Emerald Galaxy » Sat Jun 01, 2019 10:14 pm

Do GolBlerts work properly? The concept of making a level with changing elements based on the Game Of Life is something I never knew I wanted. X3

Quantumenace
Chain Chomp
Chain Chomp
Posts: 308
Joined: Mon Dec 28, 2015 2:17 am

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby Quantumenace » Sun Jun 02, 2019 1:57 am

PROX wrote:
Sun Mar 31, 2019 6:54 am
Also if a fire bro fireball makes contact with an npc with npcblocktop, it flies across the screen at blinding speed and then the game crashes. Not sure if this is the case with all NPCs with npcblocktop, but it happened with a tweeter when I ran into it. This happened when the npc was on a warp generator as well.
Ran into this issue when experimenting with moving NPCs with blocks attached to grabbed objects. You can sometimes fling an NPC by switching directions when the NPC is on the attached block.

In some circumstances when the NPC is in midair, such as this, the NPC multiplies its current speed by its speed modifier every frame until it causes a crash. It only happens if the multiplier is greater than 1, and fire bro fireballs do have this multiplier greater than 1. If it's less than 1 it will slow down in midair instead.

cpeka66
Koopa
Koopa
Posts: 19
Joined: Tue Feb 26, 2019 10:02 am

Re: SMBX2 MAGLX3 Release - Feedback, Questions and Bugs here!

Postby cpeka66 » Sun Jun 02, 2019 11:59 am

If you put NPC-457 (Red springboard) in NPC-433 (Сrate), you will see this error if you destroy NPC-433 and try to jump on NPC-457:

Image
Last edited by cpeka66 on Tue Jun 04, 2019 8:16 am, edited 1 time in total.


Return to “Events and Announcements”

Who is online

Users browsing this forum: No registered users and 1 guest

SMWCentralTalkhausMario Fan Games GalaxyKafukaMarioWikiSMBXEquipoEstelari